Steps to Configure BSNL Broadband Settings for ITI DNA Modem.

Detailed step by step article to configure BSNL Broadband Settings for ITI DNA Modem/Router. Although bsnl modem settings are already configured by bsnl department but in some cases you need to configure ITI DNA modem settings at your own. BSNL the major broadband internet player in India provides ITI DNA modems to new customers.

Earlier we have written a post about TP Link wi-fi modem settings for bsnl broadband. This post helped our readers to configure their TP Link modems for bsnl broadband. Our readers also demanded to write an article about ITI DNA modem settings configuration.

As BSNL provides ITI DNA modem by default to all new subscribers. Due to this, most of bsnl broadband subscribers will be using ITI DNA modems/routers. So I have decided to publish a article about configuration of ITI DNA modems settings for Bsnl broadband to help our valuable readers. Here I will explain detailed steps to configure BSNL broadband settings for ITI DNA modem/router over Ethernet which also called always on broadband connection as given below: -

BSNL Broadband Settings Configuration

Firstly connect bsnl ADSL phone line to your ITI DNA modem. Also connect your computer to modem. Its DSL indicator will become stable after some.

When DSL indicator becomes stable, open any web browser and type URLhttp://192.168.1.1 in address bar. It will prompt for authentication. Put username and password both as admin.

You will be logged in to ITI DNA modem/router settings page.

Go to Advanced Setup >> WAN.

Select all the protocols except one named PPPoE and remove them. Click on Edit in PPPoE protocol. Make settings as ATM PVC Configuration

PORT- 0
VPI- 0
VCI- 35
Uncheck Enable VLAN Tagging service category as UBR Without PCR
Uncheck Enable Quality of Service
Press Next

Select connect type as PPP over Ethernet (PPPoE) and Encapsulation Mode as LLC/SNAP-BRIDGING and press Next.

Make other settings as shown in below image and press Next.

Make Network Address Translation Settings as

Check Enable NAT
Check Enable Firewall
Uncheck Enable IGMP Multicast
Check WAN Service
Put service name as pppoe_0_35_1 and press Next.

Lastly you will see WAN setup summary. Press Save.

Go to Advanced Setup >> LAN

Make settings as IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Check Enable IGMP Snooping
Select Blocking mode
Select Enable DHCP Server
Start IP Address 192.168.1.1
End IP Address 192.168.1.10
Subnet Mask 255.255.255.0
Leased Time (hour) 24
Uncheck Configure the second IP Address and Subnet Mask for LAN interface option and hit Save

Keep Advanced Setup >> NAT, Security settings intact.

Go to Advanced Setup >> Quality of service

Check option Enable QoS
Select Default DSCP Mark as No Change (-1) and Save changes.
Don’t change anything in Queue Config and QoS classification

Go to Advanced Setup >> Routing >> Default Gateway

Check the option Enable Automatic Assigned Default Gateway and save the changes. Don’t change anything in Static Route, IPv6 Default Gateway, IPv6 Static Route.

Go to Advanced Setup >> DNS >> DNS Server

Check the option named Enable Automatic Assigned DNS and save the changes.

Go to Advanced Setup >> DSL

Check the options
G.Dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL2 Enabled
AnnexL Enabled
ADSL2+ Enabled
Uncheck AnnexM Enabled
Select phone line pair as Inner pair
Capability as Bitwap Enable and save the Changes.

Go to Advanced Setup >> IPv6

Check the option Enable IPv6 and Click on Save and Reboot.

Now you have successfully configured your ITI DNA modem/router for BSNL broadband.

Now go to control panel on your computer and right click on this connection. 

Go to Properties >> Double click Internet Protocol Version 4 (TCP/IPv4). Put the values as shown in below image. Lastly Press OK.

 

Extra Trick: – Sometimes your computer shows two connections in Network connections for the same broadband connection. One connection will be named as Network and other as Unidentified Network. If your broadband connection is divided in two networks, you will be not able to access internet on your computer. To overcome this problem, Go to Network Connections and right click on Local Area Connection >> Disable.

Again right click on Local Area Connection >> Enable. The two divided network connections will be merged with each other.

Now you have successfully configured BSNL broadband settings on your ITI DNA modem/router. You will see stable Internet indicator along with DSL indicator on your ITI DNA modem/router. Open any webpage on your computer. You will be able to access internet on your computer through BSNL broadband at high speeds.